Here I'm dealing with a problem when riding low in the back.
The tires rub on the metal fender/quarter panel, and the plastic guard.
With the guard removed you can see where I ran the lines for the front/rear bags.
A bit to the left you can see where the drains exit, took this chance to trim them all to equal length (roughly), though it will never be seen.
Started cutting the metal with a Dremel. you can see the shiny part that was taking chunks out of my tire.
Cleaned up with a grinding wheel, kept going a bit more from here but didn't take pictures.
Long story short, plastic guard still touches the tire, the metal barely rubs the side of the tire when airing out, but that's all the time I had for today.
Took some videos but not sure how to put them up, will do that later.