Dyno Day 5/9 - Mazda 6 Forums : Mazda 6 / Mazda Atenza Forum

MrTea · 05-01-2009, 10:33 PM

For those that aren't on the local forums, figured i'd post here since i forgot to it would seem.

Mazda Dyno Day in preperation for Mazfest later this month. It will be starting at 9AM on Sat 5/9 at Church Automotive. Wide range of Mazda's listed so far, even a couple speed6's i think, so just thought i'd see if anyone else is interested. There is also something about them buying the COBB software for tuning or something, i don't know the details on that, but they will be discounting those that want to tune with them as well.

and for those interested, they use a Dynopack setup for their setup. Also note, that Shawn is one of those guys that is known nation wide for his tuning, so those thinking about it might want to look into this a bit more.

MrTea · 05-02-2009, 02:11 AM

here's the details from the other thread about COBB

"Looks like we're picking up the MS3 and MS6 software from Cobb so we'll be able to do full tuning on the stock ECU. If anyone would like to purchase an accessport we'll waive their dyno day fee (our way of offering a discount since Cobb doesn't let us advertise below retail). If anyone wants to pre-purchase, we can have their APs there for pickup that day as well. Custom tuning beyond the Cobb flashes for anyone purchasing an AP through the dyno day will be $300 even, which is a substantial discount. Also, if someone wants to buy an Accessport but doesn't want tuning, we'll do a free before/after dyno so they can test the standard reflash."

claudeg · 05-02-2009, 04:01 PM

I will see you there MrTea... me and YNitro are gonna be rolling out together I think. It will be fun since we are going to MazFest too! hehe

MrTea · 05-02-2009, 08:08 PM

i'm not going, just passing the word around....but have fun

claudeg · 05-02-2009, 08:36 PM

OH... I thought I had seen your name on the list on MOCC.... but upon further review I was wrong! haha

MrTea · 05-02-2009, 08:40 PM

no worries, i don't have anything worth dyno'ing, so no point in requesting a day off work. i like to dyno at my local guy anyhow, since i have used him the last few years it keeps things consistant.

i do almost want to dyno the Miata to see what hp it takes to run my times on track....but not going to do it.

jack9484 · 05-03-2009, 11:12 PM

ok so I searched online for church automotive but the only one I got was one off the 110... Thats the same one that suppose to be close to the bbq on the same day as mazdafest is it...? if not Mr.tea point me in the right direction please!

MrTea · 05-03-2009, 11:32 PM

you are correct sir, here's the addy to be safe:

300 Quay Ave.Wilmington, CA 90744

It's in between the end of the 110 and 710 FWY's. There is usually a "First Tues of the month" Meet at SMS (Stimulate Motorsports) that is not turning into a Sat meet. They do a BBQ at the shop in the parking lot, and they are talking about doing a cruise down PCH after this event. It's about 20-30min or so from Church's on the high side, so a lot of people are talking about making a Mazda day out of it and heading over there afterwards.

15631 Graham St. Suite EHuntington Beach, CA 92649

i'm not at either event, just sharing the knowledge, you can check out the threads over on MOCC if you need the down low on things.

jack9484 · 05-04-2009, 02:06 AM

QUOTE (MrTea @ May 3 2009, 08:32 PM)

Quote:

you are correct sir, here's the addy to be safe:

300 Quay Ave.Wilmington, CA 90744

It's in between the end of the 110 and 710 FWY's. There is usually a "First Tues of the month" Meet at SMS (Stimulate Motorsports) that is not turning into a Sat meet. They do a BBQ at the shop in the parking lot, and they are talking about doing a cruise down PCH after this event. It's about 20-30min or so from Church's on the high side, so a lot of people are talking about making a Mazda day out of it and heading over there afterwards.

15631 Graham St. Suite EHuntington Beach, CA 92649

i'm not at either event, just sharing the knowledge, you can check out the threads over on MOCC if you need the down low on things.[/b]

Nice! Thanks Man!

05-01-2009, 10:33 PM	#1 (permalink)
MrTea Super Moderator Join Date: Mar 2003 Location: Huntington Beach, CA Posts: 8,142 Thanks: 0 Thanked 1 Time in 1 Post Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	For those that aren't on the local forums, figured i'd post here since i forgot to it would seem. Mazda Dyno Day in preperation for Mazfest later this month. It will be starting at 9AM on Sat 5/9 at Church Automotive. Wide range of Mazda's listed so far, even a couple speed6's i think, so just thought i'd see if anyone else is interested. There is also something about them buying the COBB software for tuning or something, i don't know the details on that, but they will be discounting those that want to tune with them as well. and for those interested, they use a Dynopack setup for their setup. Also note, that Shawn is one of those guys that is known nation wide for his tuning, so those thinking about it might want to look into this a bit more. __________________ '03 Lapis(mostly) 6i...Tranny swap by Gillis Motorsports : MTX-75 5speed tranny, 4.06 gears, Torsen LSD & chromoly axles, Engine build by Gillis Motorsports: 9:1 Supertech Pistons, Crower rods, Supertech valves, springs & retainers, ARP head & main studs, F2 Stage2 Turbo, Custom F2 engine/tranny mounts, 3" Turboback exhaust, Tein Basic Coilovers, Brembo Big Brake Kit and Rotora Rear Rotors, RacingBeat Front & Rear Sways, Seibon OEM hood, VF Engineering rear engine mount, Powdercoated Valvecover, TEIN hood dampers, Some sort of Body Kit from some company usually last dyno 8/23, 10psi...260HP/267TQ Still need: Seat, cage, Gillis suspension...then i'm DONE!!

05-02-2009, 02:11 AM	#2 (permalink)
MrTea Super Moderator Join Date: Mar 2003 Location: Huntington Beach, CA Posts: 8,142 Thanks: 0 Thanked 1 Time in 1 Post Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	here's the details from the other thread about COBB "Looks like we're picking up the MS3 and MS6 software from Cobb so we'll be able to do full tuning on the stock ECU. If anyone would like to purchase an accessport we'll waive their dyno day fee (our way of offering a discount since Cobb doesn't let us advertise below retail). If anyone wants to pre-purchase, we can have their APs there for pickup that day as well. Custom tuning beyond the Cobb flashes for anyone purchasing an AP through the dyno day will be $300 even, which is a substantial discount. Also, if someone wants to buy an Accessport but doesn't want tuning, we'll do a free before/after dyno so they can test the standard reflash." __________________ '03 Lapis(mostly) 6i...Tranny swap by Gillis Motorsports : MTX-75 5speed tranny, 4.06 gears, Torsen LSD & chromoly axles, Engine build by Gillis Motorsports: 9:1 Supertech Pistons, Crower rods, Supertech valves, springs & retainers, ARP head & main studs, F2 Stage2 Turbo, Custom F2 engine/tranny mounts, 3" Turboback exhaust, Tein Basic Coilovers, Brembo Big Brake Kit and Rotora Rear Rotors, RacingBeat Front & Rear Sways, Seibon OEM hood, VF Engineering rear engine mount, Powdercoated Valvecover, TEIN hood dampers, Some sort of Body Kit from some company usually last dyno 8/23, 10psi...260HP/267TQ Still need: Seat, cage, Gillis suspension...then i'm DONE!!

05-02-2009, 04:01 PM	#3 (permalink)
claudeg Track Racer Join Date: Nov 2006 Location: North Hollywood, CA Posts: 540 Thanks: 0 Thanked 0 Times in 0 Posts Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	I will see you there MrTea... me and YNitro are gonna be rolling out together I think. It will be fun since we are going to MazFest too! hehe __________________ Black Mica 07 Speed6 GT, DeBadged, Moonroof, RPM Street Springs, XXR 962 18" Gunmetal, Falcons XE912 225/40, MAZDASPEED CAI, Stage II Short Throw with base bushings, 1G DSM BOV, Street Unit Motor Mount, VEI High Res Boost Gauge with Vent Pod, Tail-Light Mod, Apexcone HID fogs, AuxMod, Tinted Windows (35% Front Doors, LIMO Rear), Sirius Tuner, CX7 Stubby Antenna, Fiber Images CF Hood, Clear Mask, RPM Smoked side markers and rear reflectors, Steel colored headlight covers Magnaflow System, Tail light covers Coming soon Claude's CarDomain MySpace FaceBook

05-02-2009, 08:08 PM	#4 (permalink)
MrTea Super Moderator Join Date: Mar 2003 Location: Huntington Beach, CA Posts: 8,142 Thanks: 0 Thanked 1 Time in 1 Post Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	i'm not going, just passing the word around....but have fun __________________ '03 Lapis(mostly) 6i...Tranny swap by Gillis Motorsports : MTX-75 5speed tranny, 4.06 gears, Torsen LSD & chromoly axles, Engine build by Gillis Motorsports: 9:1 Supertech Pistons, Crower rods, Supertech valves, springs & retainers, ARP head & main studs, F2 Stage2 Turbo, Custom F2 engine/tranny mounts, 3" Turboback exhaust, Tein Basic Coilovers, Brembo Big Brake Kit and Rotora Rear Rotors, RacingBeat Front & Rear Sways, Seibon OEM hood, VF Engineering rear engine mount, Powdercoated Valvecover, TEIN hood dampers, Some sort of Body Kit from some company usually last dyno 8/23, 10psi...260HP/267TQ Still need: Seat, cage, Gillis suspension...then i'm DONE!!

05-02-2009, 08:36 PM	#5 (permalink)
claudeg Track Racer Join Date: Nov 2006 Location: North Hollywood, CA Posts: 540 Thanks: 0 Thanked 0 Times in 0 Posts Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	OH... I thought I had seen your name on the list on MOCC.... but upon further review I was wrong! haha __________________ Black Mica 07 Speed6 GT, DeBadged, Moonroof, RPM Street Springs, XXR 962 18" Gunmetal, Falcons XE912 225/40, MAZDASPEED CAI, Stage II Short Throw with base bushings, 1G DSM BOV, Street Unit Motor Mount, VEI High Res Boost Gauge with Vent Pod, Tail-Light Mod, Apexcone HID fogs, AuxMod, Tinted Windows (35% Front Doors, LIMO Rear), Sirius Tuner, CX7 Stubby Antenna, Fiber Images CF Hood, Clear Mask, RPM Smoked side markers and rear reflectors, Steel colored headlight covers Magnaflow System, Tail light covers Coming soon Claude's CarDomain MySpace FaceBook

Remove Advertisements Sponsored Links
Mazda 6 Club Advertisement

05-02-2009, 08:40 PM	#6 (permalink)
MrTea Super Moderator Join Date: Mar 2003 Location: Huntington Beach, CA Posts: 8,142 Thanks: 0 Thanked 1 Time in 1 Post Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	no worries, i don't have anything worth dyno'ing, so no point in requesting a day off work. i like to dyno at my local guy anyhow, since i have used him the last few years it keeps things consistant. i do almost want to dyno the Miata to see what hp it takes to run my times on track....but not going to do it. __________________ '03 Lapis(mostly) 6i...Tranny swap by Gillis Motorsports : MTX-75 5speed tranny, 4.06 gears, Torsen LSD & chromoly axles, Engine build by Gillis Motorsports: 9:1 Supertech Pistons, Crower rods, Supertech valves, springs & retainers, ARP head & main studs, F2 Stage2 Turbo, Custom F2 engine/tranny mounts, 3" Turboback exhaust, Tein Basic Coilovers, Brembo Big Brake Kit and Rotora Rear Rotors, RacingBeat Front & Rear Sways, Seibon OEM hood, VF Engineering rear engine mount, Powdercoated Valvecover, TEIN hood dampers, Some sort of Body Kit from some company usually last dyno 8/23, 10psi...260HP/267TQ Still need: Seat, cage, Gillis suspension...then i'm DONE!!

05-03-2009, 11:12 PM	#7 (permalink)
jack9484 Track Racer Join Date: Feb 2008 Location: L.A. CA Posts: 191 Thanks: 0 Thanked 0 Times in 0 Posts Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	ok so I searched online for church automotive but the only one I got was one off the 110... Thats the same one that suppose to be close to the bbq on the same day as mazdafest is it...? if not Mr.tea point me in the right direction please!

05-03-2009, 11:32 PM	#8 (permalink)
MrTea Super Moderator Join Date: Mar 2003 Location: Huntington Beach, CA Posts: 8,142 Thanks: 0 Thanked 1 Time in 1 Post Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	you are correct sir, here's the addy to be safe: 300 Quay Ave.Wilmington, CA 90744 It's in between the end of the 110 and 710 FWY's. There is usually a "First Tues of the month" Meet at SMS (Stimulate Motorsports) that is not turning into a Sat meet. They do a BBQ at the shop in the parking lot, and they are talking about doing a cruise down PCH after this event. It's about 20-30min or so from Church's on the high side, so a lot of people are talking about making a Mazda day out of it and heading over there afterwards. 15631 Graham St. Suite EHuntington Beach, CA 92649 i'm not at either event, just sharing the knowledge, you can check out the threads over on MOCC if you need the down low on things. __________________ '03 Lapis(mostly) 6i...Tranny swap by Gillis Motorsports : MTX-75 5speed tranny, 4.06 gears, Torsen LSD & chromoly axles, Engine build by Gillis Motorsports: 9:1 Supertech Pistons, Crower rods, Supertech valves, springs & retainers, ARP head & main studs, F2 Stage2 Turbo, Custom F2 engine/tranny mounts, 3" Turboback exhaust, Tein Basic Coilovers, Brembo Big Brake Kit and Rotora Rear Rotors, RacingBeat Front & Rear Sways, Seibon OEM hood, VF Engineering rear engine mount, Powdercoated Valvecover, TEIN hood dampers, Some sort of Body Kit from some company usually last dyno 8/23, 10psi...260HP/267TQ Still need: Seat, cage, Gillis suspension...then i'm DONE!!