I own a roller and do not want to get rid of it yet, but I know others may want to roll there fenders. I have rolled one persons fenders on here and am willing to do others if there are others that need it done. Please get in contact with me. I am able to roll fenders to fit 245/40/18's on 8.5" rims with a +45 offset as that is what I have. Pics 57F gunmetal on red MS6 running 245/40/18. I rolled fenders for member Smokescreen76 to fit rx8 rims. Get in touch with me as I do not charge much, it will just depend on what you are trying to fit under there. I am willing to rent it out as well.
here is a pic of the roller:
Click to view attachment

This is the same roller that Street unit rents for $90 for 10 days! I rent it for however long (hopefully not more than a month) so that you can make sure you arent rubbing after you roll.

Paypal sent for the rental of your fender roller.

The roller is on the way back. For anyone looking to rent this tool, I recommend going through aviator79. It was far less expensive than anything I found online.

whats the price for rental? also if i do happen to be in ct would you be willing to roll them and for what price.

Thanks Buddy.

+1

Rental is $40. Dependent on what size rims and extent of roll you need will vary price for me to do it, but I'm not exspensive as im more trying to help out the community. You can see I ded a fairly extensive roll to fit my rims. I did it for one person on here with RX8 rims and he gave good feedback on the good sellers in the by/sell forum.
The roller should be back today and another local may want it first, but just PM me as my subscription notices never seem to show up.

Interesting. I am on Cape Cod, MA

Shipping is only 8.95 each way in a free flat rate box from PO. Just received the roller back 2 minutes ago. Refunded coldspeed's deposit one minute ago.

Interested in renting. PM sent for details.

Just got it back last night so its up for rent. I do have a heat gun but because Im installing sound deadener rght now I need it. And it wouldnt fit in the box anyways. This is still cheeper than anyone else out there so I think its a good deal. ALSO, this roller has been milled to fit past the brake calipers. All the other ones out there for rent probably do not have this part milled (were my thumb is):

I'd be interested in renting it, but only after you're done with the heatgun? I could use the heatgun, because I would also be using it on my girl's MAzda6 and I wanna make sure I don't crack her paint.

ok so I noticed it's $40 for rental, and how much is the deposit?

It is going out tomorrow to wk03879. $250 for deposit. Like I said the problem with the heat gun is it wont fit in the box so shipping will be a bit more than the flat rate of $9.60. Anyways I will let you know when I get it back.

How much do you charge to do the roll yourself? I have a set of rx-8s I want to fit on my car with 235/40/18's. Thanks.

I just got it back. I think firedawgs is renting it next, but if you want me to roll yours I can do it when I get it back. To do rears I would charge $60 total... Think thats fair.

I know your inbox is probably cluttered with PMs from the LI group buy... and I know you're having paypal problems right now... Just let me know when thats resolved so u can refund my deposit.

I received it back Friday and I just refunded it today from my bank account as I did not want to keep you waiting anylonger. I didn't open the box up, but I assume it is still in working order.
Thanks
Roller is availalbe, but I think it is going to get rented this friday by Enkei0621

Just got the fender back from a local person with an evo. He's running 185's man loads of room in those fenders.
Up for rent $40

Well...just to put my .02 cents....I rolled my fender and my girlfriends fender with a baseball bat and moving the car forward and backward and use the engines force and angular radius to do the work for me... and it it flush.

please put my name down for next in line... You should create a list..

1. Local roll to DaveRulz
2. lunchmoney
3. Elicious (if he still wants it)
4. *ICE*

bump whats the new on this? I really need mine asap!!!

If you need to do it ASAP you can rent one from rollmyfenders.com as another person did. Sorry for the delay.

site dont work and nothing came up on google. Can you fix it please? Thanks!!

sorry it is http://www.rollyourfender.com/
It will be availabe to rent soon, but I need it to roll DaveRulz's fenders in exchange for working on my stereo, but I just havent gotten it done yet. Soon I will need to do mine again but I need more than just a roll as I need to flare my fenders out. So I need to figure out how to get about another inch on my fenders. The main problem is where the welds are where the bumper joins the fender, also in the front arc of the rear wheels where the door is really close.

Thanks for the info on the rolling! Can you add me to the list? I'm very interested (the sooner the better and I'd probably roll and put the roller in the mail within 1 day of receiving it). Any estimates on timeline for availability?

Matt

any update??

Pm me your info and I will mail it out tomorrow.
Cost it $40
shipping is 10 for flat rate box. Be sure to use a flat rate box to send it back or it will cost you a lot more due to the weight.
250 deposit.
Andy PP fee for the $50,
so $301.30 to xxx
and upon the return I will refund full $250.
The roller will also be double boxed or else it will break the box open so try to make sure you pack it well.
Thanks!

sent payment and a PM.

waiting for the roller!!

Your item was delivered at 8:17 AM on June 9, 2008 in xxxxx

Sent to Mdogg today will pm confirmation #

Also
Here is the breakdown
Rental Cost: $40
shipping is 10.45 for flat rate box with delivery confirmation.
Shipping insurance offered at $4.60 (makes total w/ pp fees 57.00)

$50.45 + PP fees: 52.27 USD

250 deposit.

so $302.27 payment and upon the return I will refund full $250.
The roller will also be double boxed or else it will break the box open so try to make sure you pack it well.
Be sure to use a flat rate box to send it back or it will cost you a lot more due to the weight.


PP calc:
52.27 USD
- 1.52 USD (2.9% PayPal transaction fee)
- 0.30 USD (PayPal fixed fee)
= 1.82 USD (PayPal Fees)
= 50.45 USD (Amount Received)

57.00 USD
- 1.65 USD (2.9% PayPal transaction fee)
- 0.30 USD (PayPal fixed fee)
= 1.95 USD (PayPal Fees)
= 55.05 USD (Amount Received)

LOCAL PICKUP WELCOME

save on shipping and PP fees.

Are you still renting out the roller?

Yep but someone has it and someone else wants it next and I will need to use it sometime soon again so not sure when I will have it available. Do you really need to roll?

Yeah I do , thought I could do 225/45/18 on 18/7.5/48 with AE springs. I had 215/45/18 with 18/7.5/+45 with AE springs a lot of clearance and no problem. I guess size does matter.

Well it has been out of my hands for a long time this time but if you know how long it would take you then I will let you know.

EDIT:
just talked to RhoadBlock and he cannot use it right now and wants to be bumped down on the list so right now for a list I have:
FICHSTIX <- pming now
RhoadBlock
Mr. Tee

I'm interesting in renting your roller too.
Let me know.

I had another person interested in CA also and it is more expensive to ship there. Is there no one in CA that rents them?

Nope. A few places around here used to rent it, but they stopped because stupid people wreck their paint and blame the shop.

How much extra is the shipping up here?

I think it is just $30 because I still use the flat rate box. How long will you need it? I just got my new rims.

I just need to do the rears. I have a week off starting the 2nd of Sept, so any time that week would be great, and I could finish it up in a day.\
What would the final price be?

ummmmm...
id like to rent the roller.

WHERE YOU AT!

Im here.

Be wiling to meet up to do a roll before you ship it off?

Im thinking I need to finish my car before I roll anyones fengers, but it will be done soon and they I will have a 2 car garage to use so I will keep you all posted.

I am about 2.5 hours away so if you are up for doing a fender rolling meet one weekend I would be down. I just put on a set of gramlights with 235/40/18's and I am rubbing in the rear.

I got my RX8's mounted today and they rub with a load in the back. I am in need as there doesn't seem to be a roller anywhere in my area. Let me know.

I will need to roll my fenders too. Let me know when this tool will be available please.

OK, I know people have PMed me, but I am just not orgainized enough and finally am getting this repaired and it is ready to rent again.
Please start a list. Due to high demand I can only rent for a week at a time. I can now also include a heat gun (if I can fit in the box which I have not tested yet). It is a cheapo one, but did the job for me until I bought another one for $100. I hope to offere a cheaper rental and cheaper shipping than anyone else out there. Here is the pricing details:

Rental Cost: $40
shipping is 10.25 for flat rate box with delivery confirmation (no heat gun)
Shipping insurance offered at $5 (add to totals below)

$50.45 + PP fees: $52.27 USD
250 deposit.
so $302.27 (NO heat gun) payment and upon the return I will refund the full $250 deposit.


The roller will also be double boxed or else it will break the box open so try to make sure you pack it well.
Be sure to use a flat rate box to send it back or it will cost you a lot more due to the weight.

LOCAL PICKUP WELCOME

save on shipping and PP fees.

1.) Lebult ??? Cananda ???
2.) ydrone ???
3.) skater1 ???
4.) Tama6 ??? Local
5.) fgpalmer71
6.) Punteh
7.) mofoaka

Half of the people on this list likely dont need it anymore....

Also need to roll Dave's if he still needs it in exchange for tuning my amps, then likely get some processor and retune.

Me and mdd5148 are near each other, so if we can establish a timeframe that works for the both of us we're definitely down for it.

Mike I'll PM you.