Mazda 6 Forums banner

Different sized shift boots?

2K views 1 reply 2 participants last post by  cmorty72 
#1 ·
Hey guys quick question... I had a thread up before about the "gap" between my shift boot in the stock position and then putting on an aftermarket shift knob and now there was the dreaded "gap" which I fixed but over time the stock boot was stretched to no end in the new position since it had to come up higher and ripped almost all the way around now by the knob...

So my question is, do they sell different height shift boots and if so does anyone have a recommendation for a size if I had about a 1" gap between where the stock boot sat and where I needed it to sit up on the new bolt?
 
#2 ·
The universal boots vary in size, but then again it's hard for me to chime in on this matter being I'm an ATX sporting and MTX boot with a Wally-World shift knob (virtually no gap... wasn't ever a fan of the open gate design of the shifter for the ATX's).
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top