Stage 1 Jatco Kit - Mazda 6 Forums : Mazda 6 / Mazda Atenza Forum

CLTatenza · 08-28-2007, 02:21 PM

I heard a rumor you had quit selling the Jatco stage 1 kit, is this true? Do you have any left for purchase?

www.cp-e.com · 08-30-2007, 02:05 PM

Quote:

I heard a rumor you had quit selling the Jatco stage 1 kit, is this true? Do you have any left for purchase?[/b]

I'm sorry to say that we have discontinued the shift kit. I just spoke with one of the owners to see if we had any units here at the shop and I'm told that we don't. So sorry

fireguy1578 · 08-30-2007, 04:36 PM

Quote:

I'm sorry to say that we have discontinued the shift kit. I just spoke with one of the owners to see if we had any units here at the shop and I'm told that we don't. So sorry

[/b]

Do you guys know of another place we might be able to purchuse them?

silver six · 09-01-2007, 12:15 AM

Quote:

Do you guys know of another place we might be able to purchuse them?[/b]

+1

ShaDrag · 09-01-2007, 12:32 AM

I agree, this makes me a sad panda. It was still on my list.

Would cp-e consider making a DIY valve body kit, you know with new valves and/or springs and/or drill templates, however the shift alterations are made. I realize that not everyone may be interested in this type of highly detailed mod and assembly (maybe local machine shops could tackle it with a cp-e kit), but I think given the low cost of such a kit it may be a good project, to at least consider.

I hope no one thinks I'm attempting either the 'make and then not buy' or the 'make stuff for us older models over the newer ones' type of deal. :P

www.cp-e.com · 09-09-2007, 09:43 PM

Quote:

I agree, this makes me a sad panda. It was still on my list.

Would cp-e consider making a DIY valve body kit, you know with new valves and/or springs and/or drill templates, however the shift alterations are made. I realize that not everyone may be interested in this type of highly detailed mod and assembly (maybe local machine shops could tackle it with a cp-e kit), but I think given the low cost of such a kit it may be a good project, to at least consider.

I hope no one thinks I'm attempting either the 'make and then not buy' or the 'make stuff for us older models over the newer ones' type of deal. :P[/b]

That would be a tough sell unfortunately, for most of the reasons you mentioned. But if you genuinely think that this would be a marketable mod, then by all means try to round up some interest! I don't know all the details behind the discontinuation of the shift kits, but if you show them that serious interest exists then maybe they'll reconsider. I wish I had more information for you guys, but I'm out of the loop on this one. You could always give us a call and speak with Josh, as I'm sure he'd be happy to explain his reasoning for discontinuing that kit (301-576-6142).

Romaninus · 09-09-2007, 10:30 PM

And on my list too....

silver six · 09-11-2007, 12:21 AM

If it is no longer available, then why is it still on the web site?

bobthamazing · 09-11-2007, 12:31 AM

I would be interested!

The inevitable question is what about stage 2 and 3?

Did they ever even make it to market? What happened to them? Anyone might have them available?

fireguy1578 · 09-11-2007, 11:04 AM

Quote:

I would be interested!

The inevitable question is what about stage 2 and 3?

Did they ever even make it to market? What happened to them? Anyone might have them available?[/b]

A few people purchused the TC and I don't beleive anyone had purchused the full racing tranny.

08-28-2007, 02:21 PM	#1 (permalink)
CLTatenza Super Moderator Join Date: Dec 2004 Location: DFW Posts: 2,149 Thanks: 0 Thanked 0 Times in 0 Posts Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	I heard a rumor you had quit selling the Jatco stage 1 kit, is this true? Do you have any left for purchase? __________________ 5-door / Steel Gray Metallic</span> <div align=\'center\'><span style="color:silver">ATX Loaded Minus Leather, B&M Tranny Cooler, 40% 3M Tint, Amber Parking Lights, Interior LED's, JDM LED Tail Lights, JDM Atenza Visors, Sirius Starmate, Auxmod Basic, CP-E MAFci, CP-E Engine Mount, Progress 24mm Rear Swaybar, Corksport Strut Bar, Homemade Trunk Bar, GtSpec 6-point Ladder Brace, Hawk HPS Brake Pads, Rotora Rotors (Front Slotted and Rear Blank), Corksport Stainless Brake Lines, Motul RBF Brake Fluid Garmin Nüvi 350, Tein Hood Dampers, 17" 5zigen F10NR-C, Black Ray's Lug Nuts, 225/45/17 Yokohama AS430, HKS Hipermax LS+ Coilovers

09-01-2007, 12:32 AM	#5 (permalink)
ShaDrag Rally Racer Join Date: Jun 2004 Location: CT/NY Posts: 1,888 Thanks: 0 Thanked 0 Times in 0 Posts Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	I agree, this makes me a sad panda. It was still on my list. Would cp-e consider making a DIY valve body kit, you know with new valves and/or springs and/or drill templates, however the shift alterations are made. I realize that not everyone may be interested in this type of highly detailed mod and assembly (maybe local machine shops could tackle it with a cp-e kit), but I think given the low cost of such a kit it may be a good project, to at least consider. I hope no one thinks I'm attempting either the 'make and then not buy' or the 'make stuff for us older models over the newer ones' type of deal. :P __________________ Wagner Header'd! and enjoying it! Wants to punch bullydog in the testicules

09-11-2007, 12:21 AM	#8 (permalink)
silver six Track Racer Join Date: Apr 2006 Location: Kennesaw, GA Posts: 712 Thanks: 0 Thanked 0 Times in 0 Posts Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	If it is no longer available, then why is it still on the web site? __________________ 2004 Mazda 6s 5door

09-11-2007, 12:31 AM	#9 (permalink)
bobthamazing Track Racer Join Date: Aug 2007 Location: Springfield, Mo Posts: 433 Thanks: 0 Thanked 0 Times in 0 Posts Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	I would be interested! The inevitable question is what about stage 2 and 3? Did they ever even make it to market? What happened to them? Anyone might have them available? __________________ My Garage</span></span>

Remove Advertisements Sponsored Links
Mazda 6 Club Advertisement

09-09-2007, 10:30 PM	#7 (permalink)
Romaninus Drivers License Join Date: Apr 2006 Location: Richmond VA Posts: 53 Thanks: 0 Thanked 0 Times in 0 Posts Groans: 0 Groaned at 0 Times in 0 Posts iTrader: 0 reviews	And on my list too....